Our products

Whether it is about in or on mold graphics, TIP has THE rotomolding graphic solution you need!

 

TRANSTIP 851

PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.

To be applied in aluminium or steel, smooth or granulated mould using temperature from 30°C to 80°C.

Very high UV and friction resistance.

Glossy finish.

Application : for all PE rotomolded articles suitable to the mould.

The T851 is no longer produced because it is replaced by the T871-873-875 and 877.

TRANSTIP 863

PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.

To be applied in aluminium or steel, smooth or granulated mould using temperature from 30°C to 80°C.

Very high UV, friction, diluent, oil, gas and detergent resistance.
It differs from T851 because of a special adhesive suitable to a quick dry application for large size products.

Glossy finish.

Application : for all PE rotomolded articles suitable to the mould.

TRANSTIP 871

PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.

To be applied in aluminium or steel, smooth or granulated mould using temperature from 20°C to 70°C.

Very high UV and friction resistance.

Median solvent and cleaning agent resistance.

High flame resistance.

It differs from T863 because of a special adhesive which disappears after rotomolding.

Satin finish.

Application : for all PE rotomolded articles suitable to the mould.

TRANSTIP 873

PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.

To be applied in aluminium or steel, smooth or granulated mould using temperature from 20°C to 70°C.

Very high UV and friction resistance.

High solvent and cleaning agent resistance.

Median flame resistance.

 It differs from T863 because of a special adhesive which disappears after rotomolding.

Satin finish.

Application: for all PE rotomolded articles suitable to the mould.

TRANSTIP 875

PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.

To be applied in aluminium or steel, smooth or granulated mould using temperature from 20°C to 70°C.

Very high UV and friction resistance.

High solvent and cleaning agent resistance.

High flame resistance.

 It differs from T863 because of a special adhesive which disappears after rotomolding.

Satin finish.

The T875 can be print with the four colour process, for a real copy of your image.

Application: for all PE rotomolded articles suitable to the mould.

TRANSTIP 877

PE rotomolding self-adhesive decal to be applied on the part after rotomolding process. It’s presented on a transparent support and white protection paper.

It is to be applied on cold part after several days or directly after rotomolding.

No flaming before application of T877.

Application of T877 with a plastic scraper and strong pressure.

To finish application, you need to flame slightly.

Very high UV resistance.

Good friction resistance.

Good resistance to solvents and cleansers.

Satin finish.

Any kind of rotomolded PE part with a compatible shape.

Ideal for small series or for parts with large volumes when inmold decal is not possible technically.